Sheep Manure Processing Organic Fertilizer Process

 

1. The ratio of raw materials and ingredients

The manure is mixed with crop straw, and the amount of mixing depends on the moisture content of the sheep manure. According to the fermentation process, the water content is required to be within 45%. That is to say, the material is kneaded into a mass, and water can be seen, but the water will not drip, and the loosened mass will disperse. Then, add corn flour and the required bacteria to be tested. The reason for corn flour is to increase the sugar content to promote rapid fermentation of the bacteria.

2. Material mixing

Add the configured materials to the material mixing mixer for mixing, and the mixing is required to be uniform and thorough without leaving the slightest lumps. 3. Material fermentation

Then, the mixed materials are stacked in a fermentation tank or fermentation tank with a width of 2-6 meters and a height of 1.0 meters-15 meters, and the sheep manure compost turning machine are turned over and thrown repeatedly every other day. Normally, in the fermentation tank, the temperature will rise after 2 days of stacking, there will be no odor after another 2 days, and it will become fluffy after another 3 days, and the compost will emit fragrance after another 2 days, and the materials will be available for 15 days. Into fat.

Fourth, the fermentation process

1. In the fermentation tank for 2 days, the temperature will rise to 60℃-80℃, which will sterilize and eliminate pests.

2. On the fourth day in the fermentation tank, eliminate the odor. Then on the seventh day, the material in the tank will become loose, dry, and covered with white hyphae.

3. Fermented in the tank until the ninth day, it will emit a kind of fragrance, which is basically the same as wine.

4. The material will be matured and fully fermented until the tenth day of fermentation in the tank.

5. It means that the fermentation stage is over, and the materials can be removed to the next process with a forklift.

5. Granulation and drying process

The materials moved by the forklift to the crushing process are crushed by the semi-wet and high-humidity material crusher. Then it is mixed by a mixer and agitator, and conveyed to a fertilizer granulator through a conveyor for granulation to produce granules. The belt conveyor is sent to the dryer for drying and drying, and then enters the cooler for cooling, and then the conveyor is sent to the sieving machine for sieving.

Six, screening and packaging

More than 95% of the particles that meet the requirements will enter the next process. Approximately 5% of the particles will be sent to the pulverizer to be crushed and granulated again. The particles that meet the standard enter the coating machine for coating, and the coating can maintain nutrients. After coating, it is packed by an automatic packaging machine. In this way, the manure organic fertilizer is processed and packaged and can be put into storage for sale.

The organic fertilizer production line is mainly suitable for the harmless use of poultry and livestock manure, so as to achieve resource recycling and recycling. It is a green organic fertilizer, and its organic matter content can reach more than 50%. It is a nutrient-rich organic fertilizer.

In actual application, manufacturers of organic fertilizer equipment generally require reasonable mixing and use of trace elements according to the soil conditions in various places. In this way, special organic fertilizers for different vegetables, fruit trees and other crops with different needs will be formed.