Installation and Maintenance Points of Fertilizer Drying Machine

 Installation and test run of drum type fertilizer dryer

1. The equipment should be installed on the horizontal concrete foundation and fixed with anchor bolts.

2. Attention should be paid to the verticality of main engine during installation.

3. After installation, check whether the bolts at all parts are loose and whether the door of the main engine compartment is tight. If so, please tighten it.

4. The power line and control switch are configured according to the power of the equipment.

5. After the inspection, carry out the no-load test run, and the production can be carried out if the test run is normal.

Suggestions on maintenance of fertilizer dryer

1. Frequently observe the operation of the fan. If the flow rate is too large and does not meet the use requirements, or a small amount of flow rate is needed in a short period of time, the throttling device can be used for adjustment.

2. The sensitivity of thermometer and oil gauge should be checked regularly, and the bearing tank should be controlled within the specified range.

3. If there is any abnormal phenomenon during the start-up, shutdown or operation of the organic fertilizer dryer fan, it should be checked immediately.

4. For the faults found in the inspection, the causes should be found out and the small and coarse goods should be handled immediately. If the posting cannot be eliminated and the large faults are found in the goods, the vehicles should be stopped immediately for maintenance.

5. In addition to changing lubricating oil for fertilizer production equipment after each overhaul, the lubricating oil should also be changed on schedule.

6. The E-type rotating bearing seat should be inspected, cleaned and lubricated regularly to prevent the bearing from burning out.

In order to avoid the faults caused by improper maintenance and prevent the faults caused by fans and motors, it is necessary to overhaul and maintain the equipment according to the maintenance manual on schedule and quality, so as to ensure that the equipment can give full play to its skills and prolong its service life.