Posts

Showing posts with the label Fertilizer Composting

Regular maintenance method of organic fertilizer fermentation dumper

Image
1. After the organic fertilizer dumper works for one season, replace the gear oil of the reducer, check the bearings of all parts, remove and clean them, apply new grease and install them, and replace them in case of serious wear. 2. Take down the dust cover on the ground dumper equipment, check and tighten the bolts on the transmission rod to prevent the parts from being worn and scrapped due to the improper transmission of the parts due to the loose bolts on the transmission rod. 3. Remove the seat and the cover plate under the seat of the dumper cab, and check and tighten the bolts on the transmission shaft. To prevent the transmission shaft from loosening due to the bolt loosening on the transmission shaft seat, resulting in the shaft body tilting, twisting and scrapping.  4. When using in winter, antifreeze should be added to the water tank. If no antifreeze is added, warm water should be added before operation. After operation, the water in the water tank, body and cooler sho...

How to Maintain the Fertilizer Composting Machines?

As an important part of  organic fertilizer making line , composting is very necessary. The maintenance of compost turners is also very important.    Daily maintenance The composting turner equipment should be maintained once a week when it is not in regular operation, and once a day when it is in regular operation. The maintenance contents are as follows: 1. Semi maintenance inspection (after working for 10 hours), check whether the connecting bolts, nuts and drain plug are loose. 2. Check whether there is any defect in the bolt and cotter pin of each part, and replace it in time (the cotter pin shall not be replaced by anything else). 3. Check whether the tipping knife is damaged and whether the fastening bolt is loose. If necessary, make up, tighten or replace the new knife. 4. Check whether the electrical connector is tight, whether the insulation of the wire is good, and timely repair or replace if necessary. 5. Check whether the fastening screws of diesel engine, g...