Regular maintenance method of organic fertilizer fermentation dumper

1. After the organic fertilizer dumper works for one season, replace the gear oil of the reducer, check the bearings of all parts, remove and clean them, apply new grease and install them, and replace them in case of serious wear.

2. Take down the dust cover on the ground dumper equipment, check and tighten the bolts on the transmission rod to prevent the parts from being worn and scrapped due to the improper transmission of the parts due to the loose bolts on the transmission rod.

3. Remove the seat and the cover plate under the seat of the dumper cab, and check and tighten the bolts on the transmission shaft. To prevent the transmission shaft from loosening due to the bolt loosening on the transmission shaft seat, resulting in the shaft body tilting, twisting and scrapping. 

4. When using in winter, antifreeze should be added to the water tank. If no antifreeze is added, warm water should be added before operation. After operation, the water in the water tank, body and cooler should be drained to prevent freezing.

5. Check whether the electrical appliances work normally, whether the circuit insulation is good, and replace the connected wires if necessary.

6. It is necessary to check the tension of the drive belt regularly, adjust the tension if necessary, check whether the belt is broken, worn or has other signs of aging, and replace the belt if necessary. Check the running path of the belt and make sure that there is no obstruction between other parts of the engine and the belt. After replacing the belt, the new belt should be readjusted after several weeks of use to eliminate the slack phenomenon.

7. During long-term operation of the dumper, all exposed parts shall be coated with oil to prevent rust, and shall be covered when placed outdoors.

More information: https://fertilizergranulatormanufacturer.com/bio-compost-machine/