Introduction of FPC Organic Fertilizer Crushing Equipment

 The fermentation process of livestock and poultry manure requires the addition of certain auxiliary materials (straw, twigs, rice husks, corn cobs, etc.). In order to obtain the particle size of the auxiliary materials suitable for aerobic composting fermentation, the auxiliary materials need to be crushed, so organic fertilizer crushing equipment is required.

There are mainly three types of equipment for crushing commonly used materials: hammer crusher, large and small straw crusher, and branch crusher. In the process of composting organic fertilizer, the common composting raw material is mainly straw (large amount and low cost). Today, I will mainly introduce you to the straw shredder. The waste after food processing, such as rice husks and corn cobs, can be used to achieve satisfactory results through the straw shredder.

The straw crusher is suitable for breeding farms and small organic fertilizer processing plants. The straw pulverizer is powered by a motor or an internal combustion engine. The power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the speed-regulated power to the grass roller through a gear box, universal joint, etc. When the material to be processed enters between the upper and lower grass rollers, it is clamped by the grass roller It is held and fed into the straw pulverizer at a certain speed, chopped by a high-speed rotating knife, and then thrown out of the machine through the grass outlet. The harvested straw, because it contains long fibers, can be cut and crushed by a straw pulverizer to obtain a satisfactory particle size.

The improvement of organic fertilizer crushing equipment can start by optimizing the cutting angle of the fixed knife reasonably, optimizing the cutting speed of the cutter head, blade parameters, and the arrangement of the blades and hammers on the cutter head, so that the crushing mechanism can quickly cut and knead a variety of materials. . At the same time, increase the research on the feeding mechanism to solve the problem of difficulty in feeding and not easy to enter the crushing cavity.