Features and Maintenance Points of Crawler Turning Compost Machine

 Crawler-type compost fertilizer equipment is a kind of automatic equipment. Advanced technology makes the equipment easier to operate and more efficient. The process of sterilization, turning compost, sterilization can be completed automatically according to requirements, and the life of the equipment is not reduced. , The operating efficiency is not reduced, so the daily maintenance is indispensable. The operators of each shift need to check the fastening status of the equipment parts, check the lubrication of gears and bearings, etc. The following is a detailed introduction.

Features of crawler compost fertilizer making machine

1. Hydraulic operating system, crawler walking, sturdy and durable, strong power, advanced technology, large output, strong turning ability, hydraulic lifting adjustment of turning drum, high degree of automation, simple operation and easy to master.

2. It can achieve heating in 1 day, deodorization and sterilization in 3-5 days, and fertilizer in 7 days, which is faster and more efficient than other fermentation methods using other mechanical means. Some auxiliary facilities can also be added according to customer requirements, such as automatic sprinkling devices.

3. With the lever-operated type (without steering wheel), it fills a gap in the domestic large-scale wheel composting turner that cannot turn around. Only need to easily manipulate the two levers, you can turn left and right, brake and 360-degree turn on the spot, the steering wheel is automatically balanced.

4. Every time the flip is completed, the stack is actually reset-times. The material exchanges heat and mass with the air during the dropping process, the moisture and carbon dioxide are lost, the temperature decreases, and the oxygen concentration increases, providing a suitable environment for the aerobic fermentation of microorganisms.

5. It is suitable for the action mechanism and process requirements of microbial fermentation of poultry manure into fertilizer, and can effectively mix viscous poultry manure with microbial preparations and straw powder. Under such loose material properties, the fermentation temperature can be controlled at 60-70 degrees and maintained for 3-4 days.

Maintenance of crawler type manure compost machine

1. Shift maintenance (working for 10 hours) check, tighten the connecting bolts and nuts, and check whether the oil drain plug is loose.

2. Check the cotter pins at all parts and see if there are any defects. If necessary, replace the cotter pins with new ones. The cotter pins shall not be replaced by other objects.

3. Check whether the changing knife is defective and whether the fastening bolts are loose, and if necessary, make up and tighten them.

4. Clean the hardened attachments on the crawler-type stacker.

5. The crawler-type manure compost machine is working-after the season, replace the gear oil of the reduction box and check the bearings of all parts. After disassembling and cleaning, apply new butter, install it, and replace it if it is severely worn.

6. Check whether the crawler-type manure compost machine is worn to different degrees, and replace with a new knife if necessary.

7. The crawler-type compost making machine will not work for a long time, and all exposed parts should be oiled to prevent rust, and should be covered when placed outdoors.