Maintenance of Organic Fertilizer Automatic Packaging Scale

 Organic fertilizer automatic packaging scale, also known as organic fertilizer automatic packaging machine, is the last equipment in the organic fertilizer granulation production line and the last process in the organic fertilizer production process. If there is a problem, it will cause a large accumulation of semi-finished organic fertilizers and affect production. Therefore, it is very important to do the necessary operational checks before each start-up.

The following points should be done in the maintenance of the organic fertilizer automatic packaging scale:

1. The controllers and sensors in the components of the organic automatic fertilizer packing machine are all precision instruments. Vibration and collision must be avoided during transportation and use. It is strictly forbidden to be exposed to direct sunlight, close to heat sources, humid places, poorly ventilated places, and strong magnetic fields, etc. Work and run under the environment.

2. The working voltage and frequency must comply with the technical requirements of the controller. Do not share a switch or circuit breaker with other equipment. The case of the controller is grounded separately (no zero protection).

3. The complete and effective fastening bolts of the measuring bucket ensure that there is no virtual collision between the measuring bucket and the fixed frame.

4. Turn the "manual/automatic" switch to the "manual" position, and use manual control to check whether the feeding and unloading belts are in the correct direction (whether the valve solenoid valve is closed). If not, please reverse Swap to any two-phase wires of the belt conveyor.

5. Confirm the empty bucket, and then turn on the power of the controller. After the initial self-check of the controller, the main display weight is 0. Otherwise, the material should be manually unloaded and cleared to ensure that the system zero point is accurate.

6. Place a known weight on any part of the batching hopper, such as a bag of 50kg, the main display should be 50kg. If the weighing is found to be inaccurate, the weighing must be re-calibrated to ensure that the system is accurate.

Comments

Popular posts from this blog

Organic Biogas Residue Fermentation Tank

How to manage your horse manure better for more profits?

How Does the Self-Propelled Turning Machine Perform?